Ipad Air Garageband Midi Keyboard

Posted on
Here in North America the NHL playoffs are now in full swing and perhaps you're inspired to play some rocking organ! With GB on the iPad we get some great keyboard sounds with nifty screen controls! N

Here in North America the NHL playoffs are now in full swing and perhaps you’re inspired to play some rocking organ! With GarageBand for iPad we get some great keyboard sounds with nifty screen controls! Not only can we use these keys in our songs that we’re recording, but as I explained in a recent tutorial, live use is also a possibility!

How to rename a project in garageband mac. 2) Choose Song.3) Select the audio quality, adjust details if necessary, for artist, composer, and album, and optionally choose a cover image.


Setup and Equipment Needed

Connect the Keyboard to the iPad using the iRig MIDI. Open GarageBand, tap the + symbol in the top left and tap New Song. Select Keyboard. Tap and choose a keyboard. Hint: there are lots of amazing ones - give them all a try! 9 More “Hidden” GarageBand Tips. Back in the early days of the GarageBand iPad app, I wrote an article sharing some “hidden” tips – 9 of them to be exact. Surprisingly, they are all still relevant today! Lately, I’ve been immersed in the GarageBand app once again, while preparing my new Music Teacher’s Guide To GarageBand For iPad course and lesson plans and have discovered some. Keyboard tip #1: turn on note name labels! Did you know that this was possible in the GarageBand app? True confession time: I only found out recently, too. The option to turn note names on or off is a little hidden. You’ll need to go to your overall iPad Settings and scroll down until you can see the GarageBand app in the list on the left. May 25, 2011 Controller Keyboard with power supply - There are many to choose from and I use an Axiom Pro 61. You will definitely need the power supply as the iPad does not provide power through it’s dock port. If you want to use the Korg Nano series, you will need a USB hub with power supply.

There are a few things we need.

  • Controller Keyboard with power supply - There are many to choose from and I use an Axiom Pro 61. You will definitely need the power supply as the iPad does not provide power through it’s dock port. If you want to use the Korg Nano series, you will need a USB hub with power supply.
  • Camera Connection Kit - Our keyboard controller communicates with GB through this device.


Axiom Pro 61

Apple's Camera Connection Kit

Controls

Each instrument has it’s own layout (organ with drawbars, synths with filter controls) but also there are some functions just above the keyboard and these will vary with the instrument selected. For example, “Sustain” will be on piano but not organ, organ will have the “Rotary” switch for the Leslie, all depending on the instrument.


Although we’re going to be using a keyboard controller, if you want to use the onscreen keyboard, you get different controls for how your screen keyboard responds. On the far left is an “Octave” plus and minus. A middle button for “Glissando”, “Scroll”, “Pitch” which vary again depending on the instrument selected and the right side has a “Scale”, “Arpeggiator” and “Keyboard Layout”.

“Glissando” lets you slide across the keys like a real keyboard would. Think of the piano player using the back of his hand and sliding up or down the keys.

“Scroll” allows you to play a note and while holding it, slide the keyboard up or down. Useful if you need to get into different octaves of the on screen keyboard quickly.

“Pitch” is a like a pitch bend wheel but lets you pitch up or down between notes simply by sliding your finger. Great for the vintage synths!

“Scale” is great for solos if you want to try different sounding scales in a piece of music. Once you pick the scale you want to use, the keyboard becomes more like a single row marimba minus the #/b keys. If you use a kb controller, you will still have all the notes available but you can learn what notes are used by playing them on the iPad and matching them on your keyboard. You’ll soon be playing “Klezmer” with ease!


“Arpeggiator” is your freedom to play multiple notes with one chord held down. You can choose note order, rate, and octave range. Great for dance tunes or your version of “Teenage Wasteland”! Unfortunately, the arpeggiator does not work with a KB Controller.


“Keyboard Layout/Velocity/Key Controls” - You can choose how you would like the onscreen keyboard to be set up with choices for one or two keyboards and octave range.
“Velocity” on and off is simple enough but you also can control the velocity range depending on the instrument (no velocity for organ since there is none!) left to the middle of the screen.
“Key Controls” simply turns on and off the view of the middle button for “Glissando”, etc.
There is also a hidden feature that is very cool and similar to an aftertouch on a KB controller. Load in the “Vintage Lead” preset under “Synth Lead” and strike a note. Now move your finger up and down that note.. instant filter sweep!

Keyboard Controller

Plug your keyboard into your Camera Connection Kit and make sure it’s secure as I find it can pop out easily. If it does, you may need to restart your iPad to get control again. Open up GB and navigate to the “Keyboard” instrument. Once this opens you can then select from pianos,organs, synths, etc. by tapping on the instrument in the middle of the screen. You can even store your own presets.
Again, think of the iPad screen as the controls for the organs drawbars or synths filters. Unfortunately GB won’t record this data during recording. Pitch bend and Mod wheels will respond on your controller as will velocity and after touch. Also, there are no ways to assign a KB controller’s sliders or knobs to say, organ drawbars or synth knobs, although I did find my “master” slider with MIDI CC#7 controlled instrument volume.

Using “Smart Instruments”

One feature I wish GB would allow is the use of “autoplay” but controlled via the KB controller. But there are some interesting ideas you can do by combining the “autoplay” feature and your keyboard. For example, select “Smart Keyboard” and choose one of the 4 “autoplay” modes. You then will see 3 bars with a chord on the top bar. The bar with the chord plays both left and right hand accompaniments, the middle bar is right hand only and the bottom is left hand bass. If you hit the top bar, you could solo on the KB controller. The middle bar could allow you to try bass combinations such as G-G/F-G/E or perhaps a piano bass line with a distinctive melody. Be careful though as the sustain is used most likely and can mush up your sound in the bass line. Using the bottom bar would allow you again more right hand solos or your own accompaniment.

If you want any electric or acoustic bass instruments, you will need to use “Smart Bass”. Using the acoustic bass gives a feature that is hard to emulate on the KB controller unless you get good with the pitch bend wheel.. sliding your finger along a fretless neck. Simply select Acoustic Bass, switch the “Chords” to “Notes” and tap on the screen. It adds some realism to the bass line and with some practice, can give some convincing results. Further editing can be done on GB on your Mac.


“Smart Guitar” is very similar to the smart keyboard and bass features with one additional feature. If you use your KB Controller, you can strike chords on your keys!Now you can use the “autoplay” feature for arpeggiated chords and “strum” chords on your keyboard. Great too for having ostinato picking patterns with multiple chord changes.


Recording Tips

First and foremost.. PRACTICE! Yes.. I said that again as I did in the last tutorial. GB on the iPad does not allow editing like GB on a Mac . Not even MIDI editing for wrong notes. Maybe in version 2.. BUT.. you can slow down the tempo, unlike the Guitar/Audio recording section, and speed it up after. If needed later, you can open up the song on your Mac and edit it there. You also can save time by recording repetitive parts and then looping them. Simply record your part, double tap on the track region and select “Loop”.

If your timing is not that great or you need to tighten up a section, “Quantization” will help. Simply tap on the top right “Mixer” in the Track view and select your quantization value. Use the fastest value you played. For example, if a lead synth line played as fast as 16th notes, use the 1/16 Note value. Quantization will also affect all of the tracks regions in a section! But.. you can have different quantization on each section if a part gets moved from one section to another. Confused? Yeah.. me too at first. If you quantize a part in Section A to 1/8 notes but then move it to Section B that is quantized to 1/16 notes, the new part will show “Multiple”. This is something I seriously hope Apple fixes as it’s frustrating if you need multiple quantizations within a section.

Also, don’t be afraid to record a part and try different instruments as your song may take on a whole new flavor choosing a clav instead of a piano for example. Try duplicating the track with a similar synth but with a different filter cutoff and panned hard left and right. Or use two totally different synths. Bass lines can get really fat with this idea! Slow your song down and play in your own idea of an arpeggiated pattern.. speed up and loop!
Stay tuned for more GarageBand for iPad tips and tutorials. Till next time..don’t drive your neighbors nuts with the Minimoog playing Axel F or Tom Sawyer synth leads.

1

Connect the Keyboard to the iPad using the iRig MIDI.

2

Open GarageBand, tap the + symbol in the top left and tap New Song.

3

Select Keyboard.

4

Tap and choose a keyboard. Hint: there are lots of amazing ones - give them all a try!

5

Tap + in the right corner to choose the number of bars for your recording.

6

If you' not sure, go with automatic and GarageBand will add bars as you record.

7

Ipad Garageband Midi Keyboard

Tap the red record button and wait until the 4 beat count in plays, then go for it!

8

In record mode, the bar at the top glows red.

Ipad Air Garageband Midi Keyboard Download

9

When you complete your the final bar, you automatically enter play mode. Stop playing and press stop.

10

Tap the track view icon (left of stop) to see your recording. You can add new instruments to the piece by clicking the + sign (bottom left) and repeating steps 3 to 9. You can record up to 8 tracks.

11

Keyboard For Garageband

And that's external MIDI keyboard recording with garageBand for iOS.

Best Midi Keyboards For Ipad

Supplies

MIDI Keyboard
MIDI Interface eg iRig MIDI
iPad